Display Lldp Tlv-Config - HP 12500 Series Command Reference Manual

Field
LLDP neighbor information last
changed time
Transmit interval
Hold multiplier
Reinit delay
Transmit delay
Trap interval
Fast start times
Port 1
Port status of LLDP
Admin status
Trap Flag
Polling interval
Number of neighbors
Number of MED neighbors
Number of CDP neighbors
Number of sent optional TLV
Number of received unknown TLV

display lldp tlv-config

Use display lldp tlv-config to display the types of advertisable optional LLDP TLVs of a port.
Syntax
display lldp tlv-config [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Description
Time when the neighbor information was last updated.
LLDPDU transmit interval.
TTL multiplier.
LLDP re-initialization delay.
LLDPDU transmit delay.
Trap transmit interval.
Number of LLDPDUs sent each time fast LLDPDU transmission is
triggered.
LLDP status of port 1.
Indicates whether LLDP is enabled on the port.
LLDP mode of the port:
•
TxRx—The port sends and receives LLDPDUs.
• Rx_Only—The port only receives LLDPDUs.
• Tx_Only—The port only sends LLDPDUs.
•
Disable—The port does not send or receive LLDPDUs.
Indicates whether trapping is enabled.
LLDP polling interval, which is 0 when LLDP polling is disabled.
Number of LLDP neighbors connecting to the port.
Number of MED neighbors connecting to the port.
Number of CDP neighbors connecting to the port.
Number of optional TLVs contained in an LLDPDU sent through the
port.
Number of unknown TLVs contained in a received LLDPDU.
133