Display Protocol-Vlan Vlan - HP 3100 v2 Series Command Reference Manual

Description
Use display protocol-vlan interface to display information about protocol-based VLANs for the
specified ports.
Examples
# Display protocol-based VLAN information on Ethernet 1/0/1.
[Sysname] display protocol-vlan interface ethernet 1/0/1
Interface: Ethernet1/0/1
VLAN ID
======================================================
2
3
Table 35 Command output
Field
VLAN ID
Protocol Index
Protocol Type

display protocol-vlan vlan

Syntax
display protocol-vlan vlan { vlan-id1 [ to vlan-id2 ] | all } [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
2: System level
Parameters
vlan-id1: Specifies a protocol-based VLAN ID, in the range of 1 to 4094.
vlan-id1 to vlan-id2: Specifies a VLAN ID range. Both the vlan-id1 and the vlan-id2 arguments are in
the range of 1 to 4094. The value for vlan-id2 must be equal to or greater than the value for vlan-id1.
all: Displays information about all protocol-based VLANs.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display protocol-vlan vlan to display the protocols and protocol indexes configured on the
specified VLANs.
Related commands: display vlan.
Protocol Index
0
0
Description
ID of the protocol-based VLAN bound to the port
Protocol template index
Protocol type specified by the protocol template
Protocol Type
ipv6
ipv4
157