HP 3100 v2 Series Command Reference Manual page 198

Field
Port and protocol VLAN enabled
VLAN name of VLAN 1
Auto-negotiation supported
Auto-negotiation enabled
OperMau
PoE supported
Power port class
PSE power supported
PSE power enabled
PSE pairs control ability
Power pairs
Port power classification
Link aggregation supported
Link aggregation enabled
Aggregation port ID
MED information
Media policy type
Unknown Policy
VLAN tagged
Media Policy VlanID
Media Policy L2 priority
Media Policy Dscp
Description
Indicates whether or not protocol VLAN is enabled on the port.
Name of VLAN 1.
Indicates whether or not auto-negotiation is supported on the port.
Indicates whether or not auto-negotiation is enabled on the port.
Speed and duplex state of the port.
Indicates whether or not PoE is supported on the port.
PoE port class when the device supports PoE. PSE indicates that the
device is a power sourcing equipment.
Indicates whether the device can operate as a PSE.
Indicates whether the device is operating as a PSE.
Indicates whether the pair selection ability is available.
Power supply mode:
•
Signal—Uses data pairs to supply power.
•
Spare—Uses spare pairs to supply power.
Power class of the PD:
•
Class 0
•
Class 1
•
Class 2
•
Class 3
•
Class 4
Indicates whether link aggregation is supported.
Indicates whether link aggregation is enabled.
Aggregation group ID, which is 0 when link aggregation is disabled.
MED LLDP information.
Media policy type:
•
unknown
•
voice
•
voiceSignaling
•
guestVoice
•
guestVoiceSignaling
•
softPhoneVoice
•
videoconferencing
•
streamingVideo
•
videoSignaling
Indicates whether the media policy is unknown.
Indicates whether packets of the media VLAN are tagged.
ID of the media VLAN.
Layer 2 priority.
DSCP precedence.
191