Mvrp Gvrp-Compliance; Mvrp Registration - HP 3100 v2 Series Command Reference Manual

mvrp gvrp-compliance

Syntax
mvrp gvrp-compliance enable
undo mvrp gvrp-compliance enable
View
System view
Default level
2: System level
Description
Use mvrp gvrp-compliance enable to enable GVRP compatibility, so that the device can process
both MVRP protocol packets and GVRP protocol packets.
Use undo mvrp gvrp-compliance enable to restore the default.
By default, GVRP compatibility is disabled.
Examples
# Enable GVRP compatibility.
<Sysname> system-view
[Sysname] mvrp gvrp-compliance enable

mvrp registration

Syntax
mvrp registration { fixed | forbidden | normal }
undo mvrp registration
View
Layer 2 Ethernet port view, Layer 2 aggregate interface view, port group view
Default level
2: System level
Parameters
fixed: Specifies the fixed registration mode.
forbidden: Specifies the forbidden registration mode.
normal: Specifies the normal registration mode.
Description
Use mvrp registration to set the MVRP registration mode on the port.
Use undo mvrp registration to restore the default.
By default, the MVRP registration mode is normal.
This command is available only on trunk ports.
Related commands: display mvrp running-status.
Examples
# Configure Ethernet 1/0/1 as a trunk port, and set the MVRP registration mode to fixed on the port.
223