Item
4
5
6
Upon NVMe SSD insertion, an LED initiation sequence will be visible - lighting each LED in the carrier in sequence from
left to right. The sequence will cycle until the drive is recognized by the system. When the SSD is recognized by the
system - the Do Not Remove LED will be solid white and the Power LED will be solid green.
SFF flash adapter components and LED definitions
Item
Component
1
Locate
2
uFF drive ejection latch
Component
Power LED
Power button
Do Not Remove button
Description
•
Off—Normal
•
Solid blue—The drive is being identified by a host application.
•
Flashing blue—The drive firmware is being updated or requires an
update.
Removes the uFF drive when released.
Status
Off
Solid green
Flashing green
Off
—
—
Definition
Drive removed from the
PCIe bus and can be ejected.
Drive is powered on and
configured in system.
Do not remove the drive.
Ejection request pending. Do
not remove the drive.
Drive removed from the
PCIe bus and can be ejected.
Momentary press to request
drive removal from PCIe bus
and ejection. Drive removal
request can be denied by
operating system.
Releases the release lever
for removal and insertion.
Table Continued
Component identification
95