YASKAWA E-7-Series SGD7S Product Manual page 563

15.2 Corresponding SERVOPACK and SigmaWin+ Function Names
15.2.2 Corresponding SERVOPACK Monitor Display Function Names
Menu Bar
Button
Motion
Monitor
Status
Monitor
Input Sig-
nal Moni-
tor
Output
Signal
Monitor
Service
Life Moni-
tor
Product
Informa-
tion
–
*1.
You can use Un010 to monitor the upper limit setting for the maximum motor speed or the upper limit setting for
the encoder output resolution.
You can monitor the upper limit of the encoder output resolution setting (Pn281) for the current maximum motor
speed setting (Pn385), or you can monitor the upper limit of the maximum motor speed setting for the current
encoder output resolution setting.
15-10
SigmaWin+
Name [Unit]
Input Reference Pulse Counter [ref-
erence units]
Feedback Pulse Counter [encoder
pulses]
Fully-closed Loop Feedback Pulse
Counter [external encoder resolu-
tion]
Upper Limit Setting of Motor Maxi-
mum Speed/Upper Limit Setting of
Encoder Output Resolution
Total Operation Time [100 ms]
Feedback Pulse Counter [reference
units]
Power Consumption [W]
Consumed Power [0.001 Wh]
Cumulative Power Consumption
[Wh]
Absolute Encoder Multiturn Data
Position within One Rotation of
Absolute Encoder [encoder pulses]
Lower Bits of Absolute Encoder
Position [encoder pulses]
Upper Bits of Absolute Encoder
Position [encoder pulses]
Polarity Sensor Signal Monitor
Active Gain Monitor
Safety I/O Signal Monitor
Input Signal Monitor
Output Signal Monitor
Installation Environment Monitor −
SERVOPACK
Installation Environment Monitor −
*2
Servomotor
Service Life Prediction Monitor −
Built-in Fan
Service Life Prediction Monitor −
Capacitor
Service Life Prediction Monitor −
Surge Prevention Circuit
Service Life Prediction Monitor −
Dynamic Brake Circuit
Motor − Resolution
–
–
SERVOPACK
Un No.
Un00C Input Reference Pulse Counter [reference units]
Un00D Feedback Pulse Counter [encoder pulses]
Fully-closed Loop Feedback Pulse Counter
Un00E
[external encoder resolution]
Upper Limit Setting of Motor Maximum Speed/
*1
Upper Limit Setting of Encoder Output Resolu-
Un010
tion
Un012 Total Operation Time [100 ms]
Un013 Feedback Pulse Counter [reference units]
Un032 Power Consumption [W]
Un033 Consumed Power [0.001 Wh]
Un034 Cumulative Power Consumption [Wh]
Un040 Absolute Encoder Multiturn Data
Position within One Rotation of Absolute
Un041
Encoder [encoder pulses]
Lower Bits of Absolute Encoder Position
Un042
[encoder pulses]
Upper Bits of Absolute Encoder Position
Un043
[encoder pulses]
Un011 Polarity Sensor Signal Monitor
Effective Gain Monitor (gain settings 1 = 1, gain
Un014
settings 2 = 2)
Un015 Safety I/O Signal Monitor
Un005 Input Signal Monitor
Un006 Output Signal Monitor
SERVOPACK Installation Environment Monitor
Un025
[%]
Servomotor Installation Environment Monitor
*2
Un026
[%]
Un027 Built-in Fan Remaining Life Ratio [%]
Un028 Capacitor Remaining Life Ratio [%]
Surge Prevention Circuit Remaining Life Ratio
Un029
[%]
Un02A Dynamic Brake Circuit Remaining Life Ratio [%]
Linear Encoder Pitch (Scale pitch = Un084 ×
Un084
Un085
10 [pm])
Linear Encoder Pitch Exponent (Scale pitch =
Un085
Un084 × 10
Un085
Un020
Rated Motor Speed [min
Un021
Maximum Motor Speed [min
Name [Unit]
[pm])
-1
]
-1
]