Table of Contents
Advertisement
5.13 Holding Brake
5.13.4 Output Timing of /BK (Brake) Signal When the Servomotor Is Operating
• When the Time Set In Pn508 Elapses after the Power Supply to the Motor Is Stopped
/S-ON input, alarm,
or power OFF
Motor speed
Motor power status
/BK signal
Important
5-40
ON
OFF
Rotary Servomotor: Pn507
Linear Servomotor: Pn583
Power
supplied.
Power not supplied.
ON (Brake released.)
Pn508
The Servomotor will be limited to its maximum speed even if the brake reference output speed
level (Rotary Servomotor: Pn507, Linear Servomotor: Pn583) is higher than the maximum speed.
Analog
Motor stopped with dynamic
brake or by coasting
(Pn001 = n.
OFF (Brake
applied.)
X)
Advertisement
Table of Contents
Troubleshooting
