Crtt, Ring Type Selection; Crtt Parameters - Motorola AT Commands G24-L Developer's Manual

+CRTT, Ring Type Selection

This command plays one cycle of a ring tone, stops the cycle in the middle and sets the ring tone
to be used.
Command
Type
Set
Read
Test
The following table shows the +CRTT parameters.
<Parameter>
<RingType
Number>
<operation>
April 15, 2008
Syntax Response/Action
AT+CRTT= OK
<RingTypeNumber>,
or:
<operation>
+CME ERROR: <err>
AT+CRTT? +CRTT:
<RingTypeNumber>
OK
or:
+CME ERROR: <err>
AT+CRTT=? +CRTT: (list of
supported
<RingTypeNumber>s),
(list of supported
<operation>s)
OK
or:
+CME ERROR: <err>
Table 3-115: +CRTT Parameters
Ring tone styles (see Table
Play or set a tone
0 Play (play one cycle)
1 Set
2 Stop
G24-L AT Commands Reference Manual
Chapter 3: AT Commands Reference
The Set command sets the ring type
and operation.
The Read command returns the ring
type number.
The Test command returns the list of
supported tone type numbers and
operations.
Description
3-116)
Remarks
3-173