Chapter 4: Using the Commands
Setting Up the G24-L (Power On and Initial Actions)
There are three phases of connectivity for the G24-L:
•
Init General.
In this phase, the G24-L is asked to provide basic information which ensures that the phone
is functioning properly.
•
Enabling the SIM.
•
Registering the SIM on a network in order to see that wireless access is functioning properly.
After these three phases are completed, G24-L is ready for action and you can send/receive voice
calls, circuit switched data and GPRS.
The following figures show the phone state transactions:
No Coverage
Figure 4-1: Phone State Transactions
April 15, 2008
Init-General
Communication=OK, ID is known
Init Phone
Sim card=OK, Registered to network
Coverage Indication
Ready
Remote/Local
Remote/Local
Connected/Disconnected
Connected/Disconnected
GPRS
CSD Data
G24-L AT Commands Reference Manual
Voice
4-1