Mbc Parameters; Battery Level Parameters - Motorola AT Commands G24-L Developer's Manual

The following table shows the +MBC parameters.
<Parameter>
<Mode>
<Ind>
<BatteryLevel>
<Status>
The following table shows the battery levels parameters (as defined in +CBC command.
Example
AT+MBC?
+MBC: 0,3,2,0
OK
AT+MBC=1,1
OK
AT+MBC?
+MBC: 0,3,1,1
OK
+MBC: 0,3,1,1
+MBC: 0,4,1,1
+MBC: 0,5,1,1
AT+MBC=?
+MBC: (0-2), (0-1)
OK
April 15, 2008
Table 3-82: +MBC Parameters
0 Stop battery charging.
1 Start battery charging.
2 Automatic battery charging.
0 Disable MBC unsolicited report (default).
1 Enable MBC unsolicited report.
0-5 Battery Level values (see
The status of the battery charger:
0 The battery is in charging process.
1 The battery is not in charging process.
Table 3-83: Battery Level Parameters
VCC, V
>3.7
3.5-3.7
3.4-3.5
3.35-3.4
3.3-3.35
<3.3
//Read the current values.
// Start charging with unsolicited report.
//Read the current values.
//Unsolicited reports
//Test Mode.
G24-L AT Commands Reference Manual
Chapter 3: AT Commands Reference
Description
Table 3-83).
Battery Level
5 (90%)
4 (60%)
3 (20%)
2 (10%)
1 (5%)
0 (0%)
3-131