Motorola AT Commands G24-L Developer's Manual page 283

<Parameter>
<sw1> <sw2>
April 15, 2008
Table 3-144: +CRSM Parameters (Cont.)
Integer character format. Information, from the SIM, about the execution of the actual
command. These parameters are delivered to the TE in both cases, on successful or
failed execution of the command.
Responses to commands which are correctly executed:
<sw1> <sw2>
144 0
145 XX
158 XX
159 XX
Responses to commands which are postponed:
<sw1> <sw2>
147 0
146 0X
146 64
148 0
148 2
148 4
148 8
152 2
152 4
152 8
152 16
152 64
G24-L AT Commands Reference Manual
Chapter 3: AT Commands Reference
Description
Description
Normal ending of the command
Normal ending of the command, with extra information
from the proactive SIM, containing a command for the ME.
Length 'XX' of the response data.
Length 'XX' of the response data given in case of a SIM data
download error.
Length 'XX' of the response data.
Error Description
SIM Application Toolkit is busy. Command cannot be
executed at present, further normal commands are allowed.
Command successful but after using an internal update retry
routine 'X' times.
Memory problem.
No EF selected.
Out of range (invalid address).
• File ID not found.
• Pattern not found.
File is inconsistent with the command
No CHV initialized
• Access condition not fulfilled.
• Unsuccessful CHV verification, at least one attempt left.
• Unsuccessful UNBLOCK CHV verification, at least one
attempt left.
• Authentication failed.
In contradiction with CHV status.
In contradiction with invalidation status.
• Unsuccessful CHV verification, no attempt left.
• Unsuccessful UNBLOCK CHV verification, no attempt
left.
• CHV blocked.
• UNBLOCK CHV blocked.
3-219