Clip Parameters - Motorola AT Commands G24-L Developer's Manual

Call Control
The following table shows the +CLIP parameters
<Parameter>
<n>
<m>
<"number">
<type>
<subaddr>
<satype>
<"alpha">
<CLI validity>
Example
AT+CLIP=?
+CLIP: (0,1)
network (1)
OK
AT+CLIP=1
OK
Example +CLIP indication:
(...incoming call...)
RING
+CLIP: "2173845400",129,,128,"Doe John",0
Example +CLIP indication with restricted CLI:
AT+CRC=1
OK
(...incoming call..., caller restricted the CLI presentation (used AT+CLIR)...)
+CRING: VOICE
+CLIP: "",128,,128,"",1
3-20
Table 3-8: +CLIP Parameters
Enables/disables the CLI presentation indication after the ring indication:
0 Disable CLI presentation
1 Enable CLI presentation
The default is 0.
Shows the subscriber CLIP service status in the network:
0 CLIP not provisioned
1 CLIP provisioned
2 Unknown (for example, no network and so on)
Calling line number. The number format is specified by <type>.
Type of address octet in integer format:
145 Default when the dialing string includes the international access code character
"+".
129 Default when making a local call.
128 Type of number is unknown (usually the output when the number itself is
unknown).
NULL, field not used (String type subaddress of format specified by <satype>)
Field not used. Value is always 128 (unknown) - type of sub address octet in integer
format.
Name of the calling party (if provided by the network or if the number is found in the
G24-L phone books).
The Validity of the Calling Line Identity presentation:
0 CLI valid.
1 CLI has been withheld by the originator.
2 CLI is not available due to networking problems or limitations of the
originating network.
//CLI presentation is disabled by the G24-L (0) and is enabled by the
G24-L AT Commands Reference Manual
.
Description
April 15, 2008