Motorola AT Commands G24-L Developer's Manual page 410

AT Commands Alphabetical Summary
+CPBS
+CPBW
+CPIN
+CPMS
+CPOL
+CPUC
+CPWD
+CR
+CRC
+CREG
+CRING
+CRLP
+CRSL
A-8
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command
This command selects the
memory that is to be used for
reading and writing entries in
G24s that contain more than one
phone book memory.
This command enables the user
to store a new entry in the phone
book, or delete an existing entry
from the phone book.
This command is only relevant
for phones that use SIM cards. It
unlocks the SIM card when the
proper SIM PIN is provided, and
unblocks the SIM card when the
proper SIM PUK is provided.
This command handles the
selection of the preferred storage
area for messages.
This command is used to edit the
list of preferred operators located
in the SIM card.
This command sets the
parameters of the Advice of
Charge-related price per unit and
currency table found in the SIM
file, EFPUCT.
This command sets a new
password for the facility lock.
This command controls whether
or not the extended format of an
outgoing call is displayed or not.
This command controls whether
to present the extended format of
the incoming call indication.
This command enables/disables
the network status registration
unsolicited result code.
This unsolicited event indicates
the type of incoming call.
This command returns the Radio
Link Protocol parameters.
This command handles the
selection of the incoming call
ringer and alert tone (SMS)
sound level on the alert speaker
of the G24-L.
G24-L AT Commands Reference Manual
Description
Page 3-60
Page 3-64
Page 3-177
Page 3-76
Page 3-125
Page 3-48
Page 3-183
Page 3-49
Page 3-17
Page 3-119
Page 3-17
Page 3-118
Page 3-158
Page
April 15, 2008