Cgsms, Select Service For Mo Sms Messages; Cgsms Parameters - Motorola AT Commands G24-L Developer's Manual

+CGSMS, Select Service for MO SMS Messages

This command handles the selection of the service or service preference used by the G24-L to
send mobile-originated SMS messages.
Note:
Command
Type
Set
Read
Test
The following table shows the +CGSMS parameters.
<Parameter>
<service>
Example
AT+CGSMS=?
CGSMS:(0-3)
OK
AT+CGSMS?
CGSMS: 1
OK
April 15, 2008
This command is network dependent, which means that the network must support SMS
over GPRS.
Syntax
+CGSMS=[<service>]
+CGSMS?
+CGSMS=?
Table 3-69: +CGSMS Parameters
Indicates the service or service preference to be used.
0 GPRS
1 Circuit switched (default)
2 GPRS preferred (use circuit switched if GPRS is not available)
3 Circuit switched preferred (use GPRS if circuit switched is not available)
Other values are reserved and will result in an ERROR response to the Set command.
G24-L AT Commands Reference Manual
Chapter 3: AT Commands Reference
Response/Action
OK The Set command selects the service
or service preference used to send
+CME ERROR: <err>
SMS messages. The value that is set is
not retained after a power cycle.
+CGSMS: <service> The Read command displays the
current SMS service preference
+CME ERROR: <err>
setting.
+CGSMS: (list of The Test command displays a list of
currently available <service>s on the
currently available
network.
<service>s)
+CME ERROR: <err>
Description
Remarks
3-109