Ccwa Parameters - Motorola AT Commands G24-L Developer's Manual

Call Control
The following table shows the +CCWA parameters
<Parameter>
<n>
<mode>
<class>
<"number">
<type>
<status>
<"alpha">
<CLI validity>
Note:
Example
AT+CCWA=1
OK
AT+CCWA=?
+CCWA: (0,1)
OK
AT+CCWA?
+CCWA: 1
3-22
Table 3-9: +CCWA Parameters
Enables/disables the call waiting indication to the terminal by the G24-L.
0 - Disable
1 - Enable
The default is 0.
Call waiting service request to the network. When the <mode> parameter is not given,
the network is not interrogated.
0 - Disable
1 - Enable
2 - Query status
Sum of integers each representing a class of information.
1 - Voice (telephony)
2 - Data (refers to all bearer services)
4 - Fax (facsimile services)
The default value is 7.
Calling line number. The number format is specified by <type>.
Type of address octet in integer format:
145 - Default when the dialing string includes the international access code character
"+".
129 - Default when making a local call.
128 - Type of number is unknown (usually the output when the number itself is
unknown)
Call waiting support by the network (output for <mode>=2).
0 - Not active
1 - Active
Name of the calling party (if provided by the network or if the number is found in the
G24-L phone books).
The Validity of the Calling Line Identity presentation:
0 - CLI valid.
1 - CLI has been withheld by the originator.
2 - CLI is not available due to networking problems or limitations of the originating
network.
When the parameter <mode> is 2 (Query status), the first parameter is ignored and the
third parameter is always treated as class = 7.
//Enable call waiting on G24-L
G24-L AT Commands Reference Manual
.
Description
April 15, 2008