Chapter 4: Site Selection And Deployment Guidelines; Preparation - Motorola 2.1 Networking Setup Manual

Chapter 4: Site Selection and Deployment Guidelines

Chapter 4: Site Selection and
Deployment Guidelines
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
This chapter will provide information on how to assemble a MOTOMESH Duo device as well as general
guidelines to be observed when evaluating a potential deployment location.

Preparation

MOTOMESH Duo devices must be installed by trained professionals familiar with RF planning and
regulatory limits defined by the country of installation. All common precautions for grounding and ESD
(Electrostatic Discharge) protection should be observed during deployment and installation. MOTOMESH
Duo devices are designed to be installed outdoors and must be installed such that no harmful
interference results from device operation.
All device wiring must follow the National Electric Code (NEC) or wiring requirements in the country of
installation. All location building and structure codes must be observed.
During installation safety precautions must be taken to avoid:
•
Exposure to high voltage sources
•
Antenna contact with overhead power lines
•
Falling tools and or equipment
•
Vehicular traffic in and around mounting locations
.
.
4-1
Chapter
4