Cmee Parameters - Motorola AT Commands G24-L Developer's Manual

Command
Type
Set
Read
Test
The following table shows the +CMEE parameters.
<Parameter>
<n>
April 15, 2008
Syntax Response/Action
AT+CMEE=[<n>] OK
or:
+CME ERROR: <err>
AT+CMEE? +CMEE: <n>
OK
AT+CMEE=? +CMEE: (list of
supported <n>s)
OK
Table 3-139: +CMEE Parameters
0 Disable the +CME ERROR: <err> result code and use ERROR.
1 Enable the +CME ERROR: <err> or +CMS ERROR: <err> result codes and
use numeric <err> values or +STK ERROR: <err> result codes and use numeric <err>
values.
2 Enable the +CME ERROR: <err> or +CMS ERROR: <err> result codes and
use verbose <err> values or +STK ERROR: <err> result codes and use numeric <err>
values.
The default value is 0.
G24-L AT Commands Reference Manual
Chapter 3: AT Commands Reference
Remarks
The Set command enables or disables the
use of result code +CME ERROR: <err> as
an indication of an error relating to the
functionality of the G24-L.
The Read command returns the current
setting format of the result code.
The Test command returns values
supported by the terminal as a compound
value.
Description
3-207