Preface
Note: All references to G24-L also apply to G24-LC, except where otherwise
Manual Scope
This manual introduces the G24-L AT commands, and describes how software developers can use
these commands to communicate with the G24-L device, and to create software applications that
communicate with the G24-L using these commands.
Note:
Target Audience
This manual is intended for software developers who communicate with the G24-L device using
the AT commands, and create applications to communicate with the G24-L device using the AT
commands.
Manual Organization
This manual contains the following chapters:
•
"Preface"
liability notification.
•
"Chapter 1: Product Features"
AT commands.
•
"Chapter 2: Introduction to AT Commands"
and includes a general explanation of the command's format and usage. It also describes
supported character sets and error handling.
•
"Chapter 3: AT Commands Reference"
including examples, where relevant.
•
"Chapter 4: Using the Commands"
various G24-L functionality, including G24-L setup and connectivity, SMS, call control, data
calls, GPRS, Sleep mode, audio, STK and TCP/IP.
•
"Chapter 5: Tools"
•
"Appendix A: Reference Tables"
also provides an alphabetical list of all the AT commands.
April 15, 2008
noted.
The integrator should read the corresponding SW release notes for the G24-L version he
is using to get information about differences from this manual.
provides a scope for this manual, document convention, safety instructions and a
describes the the G24-L drivers and application flashing tool.
G24-L AT Commands Reference Manual
introduces the new product features and provides a list of the
provides an introduction to the AT commands,
provides a reference to all available AT commands,
provides scenarios and examples for implementing
provides conversions between different character sets. It
xvii