Motorola AT Commands G24-L Developer's Manual page 412

AT Commands Alphabetical Summary
+EMPC
+EPIN
+FMI
+FMM
+FMR
+GMI
+GMM
+GMR
+GSN
+ICF
+IPR
+MADIGITAL
+MAFEAT
+MAMUT
+MAPATH
A-10
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command
This command unlocks or
resets the first PLMN of the
inserted SIM.
This command is only relevant
for phones that use SIM cards. It
verifies the PIN2 indicator.
This command requests
manufacturer identification.
This command requests the
model identification.
This command requests the
revision identification.
This command requests
manufacturer identification.
This command requests the
model identification.
This command requests the
revision identification.
This command requests the
product serial number
identification.
This command determines the
local serial port start/stop
(asynchronous) character framing
used by the DCE when accepting
DTE commands and transmitting
information text and result codes,
whenever these are not done
automatically.
This command is responsible for
setting and saving the request
baud rate.
This command switches between
analog and digital audio modes.
This command controls the
various algorithm features, such
as sidetone, echo cancel and
noise suppress.
This command controls the
muting/unmuting of all input
paths (MIC, HDST_MIC,
DIGITAL_RX).
This command sets/requests the
active input accessory, and the
output accessory for each feature.
G24-L AT Commands Reference Manual
Description
Page 3-187
Page 3-181
Page 3-1
Page 3-2
Page 3-3
Page 3-1
Page 3-2
Page 3-3
Page 3-3
Page 3-142
Page 3-133
Page 3-170
Page 3-169
Page 3-168
Page 3-163
Page
April 15, 2008