Motorola AT Commands G24-L Developer's Manual page 162

SMS
Reference
<TP-RA>
<TP-SCTS>
<TP-DT>
<TP-ST>
<TP-PI>
<TP-PID>
<TP-DCS>
<TP-UDL>
<TP-UD>
Notes:
3-98
Table 3-58: Layout of SMS-STATUS-REPORT in PDU Mode (according to
Description
Mandatory:
Recipient address formatted according to
the formatting rules of address fields.
Mandatory:
The TP-Service-Center-Time-Stamp field
is given in semi-octet representation, and
represents the local time as described in
GSM03.40
Mandatory:
Discharge-Time of <TP-ST>, is given in
semioctet representation, and represents
the local time as described in GSM03.40
Mandatory:
Status of the MO message
Optional:
Parameter indicating the presence of any
of the optional parameters which follow.
See Table 3-59.
Optional:
Protocol-Identifier. Values between
0-255.
Optional:
Data Coding Scheme. Values between
0-255.
Optional:
User data length
Optional:
User data
•
Any unused bits will be set to zero by the sending entity and will be ignored by the
receiving entity.
•
The maximum guaranteed length of TP-UD is 131 octets. In order to achieve the maximum
octet of 143, the TP-RA field must have a length of two octets and TP-PID and TP-DCS
must not be present.
•
TP-PI is Mandatory if any of the optional parameters following TP-PI is present,
otherwise optional.
G24-L AT Commands Reference Manual
GSM03.40) (Cont.)
2-12 BYTES
7 BYTE
7 BYTES
1 BYTE
1 BYTE
1 BYTE
1 BYTE
1 BYTE
131 BYTES
Length
April 15, 2008