Motorola AT Commands G24-L Developer's Manual page 411

+CRSM
+CRTT
+CSCA
+CSCS
+CSDH
+CSMP
+CSMS
+CSNS
+CSSN
+CSQ
+CSVM
+CTFR1
+CUSD
April 15, 2008
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command
This command provides limited
access to the Elementary Files on
the SIM.
This command plays one cycle of
a ring tone, stops the cycle in the
middle, and sets the ring tone to
be used.
This command handles the
selection of the SCA and the
TOSCA.
This command selects the G24-L
character set.
This command shows the Text
Mode parameters.
This command sets the Text
Module parameters.
This command handles the
selection of the SMS service
type.
This command handles the
selection of the bearer or
teleservice to be used when a
mobile terminated single
numbering scheme call is
established.
This command handles the
enabling and disabling of
supplementary service-related,
network-initiated, notifications.
This command returns the signal
strength received by the G24-L.
This command handles the
selection of the number to the
voice mail server.
This command terminates an
incoming call and diverts the
caller to the number previously
defined in CCFC, or to a voice
mail if one exists for the
subscriber.
This command allows control of
Unstructured Supplementary
Service Data (USSD), according
to GSM 02.90.
G24-L AT Commands Reference Manual
Appendix A: Reference Tables
Description
Page 3-216
Page 3-173
Page 3-78
Page 3-4
Page 3-81
Page 3-79
Page 3-75
Page 3-34
Page 3-50
Page 3-117
Page 3-66
Page 3-37
Page 3-53
Page
A-9