Cpol, Preferred Operators - Motorola AT Commands G24-L Developer's Manual

+CPOL, Preferred Operators

This command is used to edit the list of preferred network operators located in the SIM card.
Command
Type
Set
Read
Test
April 15, 2008
Syntax Response/Action
AT+CPOL=[<index>] OK
[,<format>[,
or:
<oper>]]
+CME ERROR: <err>
AT+CPOL? +CPOL:
<index1>,<format>,<oper1>
[<CR><LF>+CPOL:
<index2>,<format>,<oper2>
[...]]
OK
or:
+CME ERROR: <err>
AT+CPOL=? +CPOL: (list of supported
<index>s),(list of supported
<format>s)
OK
or:
+CME ERROR: <err>
* Index range is SIM
dependent
G24-L AT Commands Reference Manual
Chapter 3: AT Commands Reference
Remarks
The Set command writes an entry in
the list of preferred operators.
The G24-L may also update
Note:
this list automatically when
new networks are selected.
The Read command displays all the
preferred operators that have been
entered into the list.
The Test command displays the
entire index range supported by the
SIM.
3-125