Mipxon, Flow Control - Xon; Mipconf - Configure Internal Tcp/Ip Stack - Motorola AT Commands G24-L Developer's Manual

Event
+MIPXOFF: <Socket ID>
Example
+MIPXOFF:
From this point, the terminal is not allowed to send data, until it receives the +MIPXON
command.

MIPXON, Flow Control - Xon

This command is the unsolicited event that the G24-L sends to the terminal when it detects that it
has free memory in the accumulating buffer and can process new +MIPSEND requests, after the
+MIPXOFF event.
Event
+MIPXON: <Socket ID>
Example
+MIPXON: 1

MIPCONF - Configure Internal TCP/IP stack

This command allows to configure TCP stack parameters, such as retransmissions number, upper
and bottom limits of retransmission timeout, close delay. It can be used to configure TCP socket
April 15, 2008
//The G24-L detects that the accumulating buffer 1 has reached its
Xoff watermark.
//The G24-L pushed the data into the protocol stack on socket 1
and is able to handle more data from the terminal.
G24-L AT Commands Reference Manual
Chapter 3: AT Commands Reference
3-289