Fo> For Sms-Status-Report Message; Tp-Pi> For Sms-Status-Report Message - Motorola AT Commands G24-L Developer's Manual

Bit/s
0-1
2
5
6
Note:
April 15, 2008
Table 3-59: <fo> for SMS-STATUS-REPORT Message
Reference
Mandatory:
Message-Type-Indicator
Mandatory:
TP-More-Message-To-Send
Mandatory:
TP-Status-Report-Qualifier
Optional:
TP-User-Data-Header-Indicator
Table 3-60: <TP-PI> for SMS-STATUS-REPORT Message
Bit/s
0
1
2
3-7
Reserved bits are ignored.
G24-L AT Commands Reference Manual
Chapter 3: AT Commands Reference
Parameter describing the message type.
1 0 SMS-STATUS-REPORT (in the
direction SC to MS)
Parameter indicating whether or not more
messages are waiting to the MS in the
SC.
0 More messages are waiting for the MS
in this SC
1 No more messages are waiting for the
MS in this SC
Parameter indicating whether the
previously submitted TPDU was an
SMS-SUBMIT or an SMS-COMMAND:
0 The SMS-STATUS-REPORT is the
result of a SMS-SUBMIT.
1 The SMS-STATUS-REPORT is the
result of an SMS-COMMAND
Parameter indicating whether or not a
status report will be returned to the SME.
0 A status report will not be returned to
the SME
1 A status report will be returned to the
SME
Description
0 TP-PID not presence
1 TP-PID not presence
0 TP-DCS not presence
1 TP-DCS presence
0 TP-UDL not presence
1 TP-UDL presence
Reserved
Description
3-99