Cmer, Mobile Equipment Event Reporting; Clan, Me Language; Cmer Parameters - Motorola AT Commands G24-L Developer's Manual

+CMER, Mobile Equipment Event Reporting

Command
Type
Set
Read
Test
The following table shows the +CMER parameters.
<Parameter>
<mode>
<keyp>
<disp>
<ind>
<bfr>

+CLAN, ME Language

This command handles the selection of language in the ME.
April 15, 2008
Syntax
+CMER=[<mode> OK
[,<keyp>[,<disp>
or:
[,<ind>[,<bfr>]]]]]
+CME ERROR: <err>
+CMER? +CMER:
<mode>,<keyp>,<disp>,<ind>,<bfr>
OK
or:
+CME ERROR: <err>
+CMER=? +CMER: (list of supported
<mode>s),(list of supported
<keyp>s),(list of supported
<disp>s),(list of supported
<ind>s),(list of supported <bfr>s)
Table 3-148: +CMER Parameters
Controls the processing of unsolicited result codes specified within this command.
0 Buffer unsolicited result codes in G24-L
Reserved for future implementation.
Reserved for future implementation.
0 No indicator events reporting.
1 Indicator event +CIEV: <ind>,<value>.
<ind> shows the indicator order number and <value> is new value of indicator.
The default value is 0.
Controls the effect on buffered codes.
0 Clear buffer.
G24-L AT Commands Reference Manual
Chapter 3: AT Commands Reference
Response/Action
Description
Remarks
The Set command
enables/disables an external
accessory to receive event
reports from the G24-L. In
some cases, this is used to
track the user activity for
redisplay on a vehicle system,
or to perform accessory-spe-
cific menu operations.
The Read command queries
the current settings for the
AT+CMER command.
The Test command returns
the possible <mode>,
<keyp>, <disp>, <ind>, and
<bfr> values.
3-225