Cind, Indicator Control; Cind Parameters - Motorola AT Commands G24-L Developer's Manual

AT+CLAN="DE"
OK
AT+CLAN?
+CLAN: "DE"
OK

+CIND, Indicator Control

This command is used to query the status of various ME indicators.
Command
Type
Read
Test
The following table shows the +CIND parameters.
<Parameter>
<service>
<call>
<recsms>
<roam>
<signal>
<simav>
<smsfull>
April 15, 2008
Syntax
AT+CIND? +CIND:<ind>,<ind>....
AT+CIND=? +CIND :(<descr>,(list of supported
<ind>s)) ,(<descr>,(list of
supported<ind>s))...
Table 3-150: +CIND Parameters
0 Service not available.
1 Service available.
0 No call in progress.
1 Call in progress.
0 No unread messages.
1 Unread messages exist.
0 ME is camped on a home network.
1 ME is roaming on home network.
2 ME is roaming on other network.
0 ME has no service.
1 ME has 1 bar of signal strength.
2 ME has 2 bars of signal strength.
3 ME has 3 bars of signal strength.
4 ME has 4 bars of signal strength.
5 ME has 5 bars of signal strength.
0 No SIM card available.
1 SIM card is inserted.
0 SMS storage is not full.
1 SMS storage is full.
G24-L AT Commands Reference Manual
Chapter 3: AT Commands Reference
Response/Action
Description
Remarks
Read command returns the
status of ME indicators.
Test command returns pairs,
where string value <descr> is
a short description of the indi-
cator and compound value is
the allowed values for the
indicator.
3-227