Set Event List Parameters - Motorola AT Commands G24-L Developer's Manual

The following table shows the Set Event List parameters.
<Parameter>
<Result>
<Data>
Note:
April 15, 2008
Table 3-189: Set Event List Parameters
5 User Activity event
6 Idle Screen Available event
8 Language Selection event
9 Browser Termination event
None User Activity event
None Idle Screen Available event
0 Browser Termination event (User terminated)
1 Browser Termination event (Error terminated)
4 Language Selection event, with string coded as follows:
Byte(s) Description
1 Language tag
2 Length='02'
3-4 Language
Each language code consists of a pair of alphanumeric characters, defined in ISO 639 [4].
Each character is coded on one byte using the SMS default 7-bit coded alphabet, as
defined in TS 23.038, with bit 8 set to 0. For a list of language codes, refer to the section
that follows.
G24-L AT Commands Reference Manual
Chapter 3: AT Commands Reference
Description
Length
1
1
2
3-267