W, Store User Profile; W Parameters - Motorola AT Commands G24-L Developer's Manual

UI (User Interface)
Example
at&v
ACTIVE PROFILE:
E1 Q0 V1 X4 &C1 &D2 &K3 &Y0
S00:000 S01:000 S02:043 S03:013 S04:010 S05:008 S06:004 S07:050
S08:004 S09:006 S10:014 S12:040 S14:AAH S16:80H S18:000 S21:30H
S22:F6H S23:1BH S25:005 S26:001 S27:09H
STORED PROFILE 0:
E1 Q0 V1 X4 &C1 &D2 &K3
S00:000 S02:043 S03:013 S04:010 S05:008 S07:050 S12:040
STORED PROFILE 1:
E1 Q0 V1 X4 &C1 &D2 &K3
S00:000 S02:043 S03:013 S04:010 S05:008 S07:050 S12:040
OK
&W, Store User Profile
Command Type
Set
The following table shows the &W parameters.
The parameters that are set in a profile are described in the table below.
Profile
Parameter
ATE
ATQ
ATV
ATX
3-222
Syntax Response/Action
&W[<n>] OK
or:
+CME ERROR: <err>
Table 3-145: &W Parameters
<Parameter>
<n> User's profile number:
0 Store to user's profile 0
1 Store to user's profile 1
The default value is 0.
Table 3-146: Profile Parameters
Description
Echo
Result code return mode
Display result code
Select result code
G24-L AT Commands Reference Manual
Remarks
The Set command stores the current
active configuration to user profile 0 or
1.
Description
Parameter Default
Range Value
0-1 1
0-1 0
0-1 1
0-4 0
Length in
Bits
1
1
1
3
April 15, 2008