Motorola AT Commands G24-L Developer's Manual page 155

The +MMGL command does not change the message status. In addition, +MMGL includes a
<stat> selection that can be used to query the G24-L for a list of message headers without
attendant message data.
Command Type
Set
Test
April 15, 2008
Syntax
+CMGL If text mode (+CMGF=1) command execution is
[=<stat>]
successful and SMS-SUBMITs and/or
SMS-DELIVERs:
or
+CMGL:
+MMGL
[=<stat>] <index>,<stat>,<oa/da>,,[<scts>]
[,<tooa/toda>,<length>]<CR><LF><data>[<CR><
LF>
+CMGL:
<index>,<stat>,<da/oa>,,[<scts>]
[,<tooa/toda>,<length>]<CR><LF><data>[...]]
The parameters <tooa/toda>,<length> refer
command shows the Text Mode Parameters +CSDH
and will be shown according to +CSDH settings.
If text mode (+CMGF=1) command execution is
successful and SMS-COMMANDs:
+CMGL:
<index>,<stat>,<fo>,<ct>[<CR><LF>+CMGL:
<index>,<stat>,<fo>,<ct>[...]]
If text mode (+CMGF=1), command execution is
successful and CBM storage:
+CMGL:
<index>,<stat>,<sn>,<mid>,<page>,<pages><CR>
<LF><data>[<CR><LF>
+CMGL:
<index>,<stat>,<sn>,<mid>,<page>,<pages>
<CR><LF><data>[...]]
If text mode (+CMGF=1) command execution is
successful and SMS-STATUS_REPORTs:
+CMGL:
<index>,<stat>,<fo>,<mr>,[<ra>],[<tora>],<scts>,<
dt>,<st>[<CR><LF>
+CMGL:
<index>,<stat>,<fo>,<mr>,[<ra>],[<tora>],<scts>,<
dt>,<st>[...]]
In PDU mode (+CMGF=0):
+CMGL:
<index>,<stat>,[<alpha>],<length><CR><LF><pd
u>[<CR><LF>
+CMGL:
<index>,<stat>,[<alpha>],<length><CR><LF>
<pdu>[...]]
Or
+CMS ERROR: <err>
+CMGL=? +CMGL: (list of supported <stat>s)
+MMGL=? +MMGL: (list of supported <stat>s)
G24-L AT Commands Reference Manual
Chapter 3: AT Commands Reference
Response/Action Remarks
The Test
command
lists all the
supported
<stats>
3-91