Mipflush, Flush Data From Buffers; Mippush Parameters; Mipflush Parameters - Motorola AT Commands G24-L Developer's Manual

GPRS
The following table shows the +MIPPUSH parameters.
<Parameter>
Socket ID
Destination IP
Destination
Port
Example
AT+MIPPUSH=1
using the +MIPOPEN command)
+MIPPUSH: 0
OK

+MIPFLUSH, Flush Data from Buffers

This command causes the G24-L to flush (delete) data accumulated in its accumulating buffers.
Command Type
Set
Read
Test
The following table shows the +MIPFLUSH parameters.
3-286
Table 3-201: +MIPPUSH Parameters
1,2,3,4Number of valid socket
IP of destination site in the format AAA.BBB.CCC.DDD. The value can be written in
1, 2 or 3 digits.
0-65535Port of destination site. Written in decimal digits.
//Terminal asks the G24-L to flush the buffer in socket 1 (was opened
Syntax
+MIPFLUSH = <Socket ID>
+MIPFLUSH?
+MIPFLUSH=?
Table 3-202: +MIPFLUSH Parameters
<Parameter>
Socket ID 1,2,3,4 - Number of valid sockets
G24-L AT Commands Reference Manual
Description
Response/Action
ERROR
or:
+MIPFLUSH: <Socket ID>
OK
+MIPFLUSH:[<socket ID>]
+MIPFLUSH=(<Socket ID>)
Description
April 15, 2008