Crc Parameters - Motorola AT Commands G24-L Developer's Manual

Call Control
Command
Type
Set
Read
Test
RING/+CRING Indication
+CRING: <type>
or:
RING
The following table shows the +CRC parameters.
<Parameter>
<n>
<type>
ASYNCCSD
REL ASYNCCSD
FAX
VOICE
ALT
Example
AT+CRC?
+CRC: 0
OK
AT+CRC=?
+CRC: (0-1)
OK
Example - RING/+CRING indication
(..Incoming Data Call..)
RING
RING
3-18
Syntax Response/Action
+CRC=[<n>] OK
+CRC? +CRC: <n>
OK
+CRC=? +CRC: (list of supported <n>s)
Table 3-7: +CRC Parameters
0 Extended format disabled
1 Extended format enabled
The default value is 0.
Type of incoming call:
asynchronous transparent
asynchronous non-transparent
Fax class 1
Normal voice
Fax/voice
G24-L AT Commands Reference Manual
Remarks
The Set command enables/disables the
extended format of an incoming call
indication. When enabled, an incoming
call is indicated to the terminal with an
unsolicited result code
+CRING:<type> instead of the normal
RING.
The Read command queries the current
settings for the cellular result code.
The Test command returns the possible
<n> values.
Description
April 15, 2008