Mcst, Call Status Messages - Motorola AT Commands G24-L Developer's Manual

Call Control
+CLCC: 0
OK
AT+CLCC=1
OK
ATD055490698;
OK
+CLCC: 1,0,2,0,0,"055490698",129,"Alpha"
+CLCC: 1,0,3,0,0,"055490698",129," Alpha "
OK
+CLCC: 1,0,0,0,0,"055490698",129," Alpha "
ATH
NO CARRIER
OK
+CLCC: 1,0,6,0,0,"055490698",129," Alpha

+MCST, Call Status Messages

This command displays the current state of the call processing, and also enables/disables the
unsolicited indication of any change in the call processing state.
Command Type
Set
Read
+MCST Indication
When a change in call state occurs and the +MCST is set to n=1 the G24-L will give the
following indication:
+MCST: <state>
3-42
//Example with unsolicited indication
Syntax Response/Action
+MCST=<n> OK
or:
+CME ERROR: <err>
+MCST? +MCST: <state>
OK
G24-L AT Commands Reference Manual
Remarks
The Set command Enables/disables the
unsolicited call status messages.
The Read command returns the current
call processing state.
April 15, 2008