Motorola AT Commands G24-L Developer's Manual page 47

AT Command
+CLCC
+MCST
Call Advice of Charge Messages
+CAOC
+CACM
+CAMM
+CPUC
+CR
Supplementary Services
+CSSN
+CUSD
+COLP
Phone Books and Clock
Directory Access Commands
+CPBS
+CPBR
+CPBF
+CPBW
+CSVM
+MDSI
+MCSN
April 15, 2008
Table 1-1: AT Commands (Cont.)
Description
This command displays a list of all current G24-L calls and their
statuses, and also enables/disables the unsolicited indication of the
call list.
This command displays the current state of the call processing, and
also enables/disables the unsolicited indication of any change in the
call processing state.
This command displays information about the cost of calls.
This command resets the Advice of Charge accumulated call meter
value in the SIM file, EFACM.
This command sets the Advice of Charge accumulated call meter
maximum value in the SIM file, EFACMmax.
This command sets the parameters of the Advice of Charge-related
price per unit and currency table found in the SIM file, EFPUCT.
This command controls whether or not the extended format of an
outgoing call is displayed or not.
This command handles the enabling and disabling of supplementary
service-related, network-initiated, notifications.
This command allows control of Unstructured Supplementary
Service Data (USSD), according to GSM 02.90.
This command refers to the GSM supplementary service COLP,
Connected Line Identification Presentation, which enables a calling
subscriber to get the connected line identity (COL) of the called
party after setting up a mobile-originated call.
This command handles the selection of the memory to be used for
reading and writing entries in G24-Ls that contain more than one
phone book memory.
This command recalls phone book entries from a specific entry
number, or from a range of entries.
This command searches the currently active phone book for a
particular entry, by name.
This command stores a new entry in the phone book, or deletes an
existing entry from the phone book.
This command handles the selection of the number to the voice mail
server.
This command enables unsolicited reporting of indications of SIM
deactivation and invalidation.
This command sets EFmsisdn in the SIM.
G24-L AT Commands Reference Manual
Chapter 1: Product Features
Page
Page 3-40
Page 3-42
Page 3-44
Page 3-46
Page 3-47
Page 3-48
Page 3-49
Page 3-50
Page 3-53
Page 3-56
Page 3-60
Page 3-61
Page 3-63
Page 3-64
Page 3-66
Page 3-67
Page 3-69
1-17