Clvl, Loudspeaker Volume; Crsl Parameters - Motorola AT Commands G24-L Developer's Manual

The following table shows the +CRSL parameters.
<Parameter>
<level>
Example
AT+CRSL?
+CRSL: 7
OK
AT+CRSL=?
+CRSL: (0-7)
OK
AT+CRSL=5
OK

+CLVL, Loudspeaker Volume

This command sets the volume of the internal loudspeaker (which also affects the key feedback
tone) of the G24-L.
This command is applicable for Analog and Digital modes.
Note:
The +CLVL command can be used even when the SIM is not inserted.
Command Type
Set
Read
Test
April 15, 2008
Table 3-101: +CRSL Parameters
0 Mute
1-7 Ringer sound level (1 is lowest; 7 is default after flex)
The +CLVL command does not control the alert speaker.
In this command, the new value remains after power cycle.
Syntax
+CLVL=<level>
+CLVL?
+CLVL=?
G24-L AT Commands Reference Manual
Chapter 3: AT Commands Reference
Description
Response/Action
OK The Set command sets the internal
loudspeaker volume level.
+CME ERROR: <err>
+CLVL: <level> The Read command displays the
current internal loudspeaker volume
+CME ERROR: <err>
setting.
The Test command displays the
+CLVL: (list of
possible loudspeaker volume settings.
supported <level>s)
+CME ERROR: <err>
Remarks
3-159