Command Type
Set
April 15, 2008
Syntax
AT+MTKP=<Cmd
OK
Type>,<Result>
or:
[,<Data>]
+CME ERROR: <err>
G24-L AT Commands Reference Manual
Chapter 3: AT Commands Reference
Response/Action
Remarks
The Set command allows
the user to answer the
following proactive
commands:
• GET_INKEY Key
pressed from the user.
• GET_INPUT Message
entered by the user.
• Enable/disable the
DTMF service by the
user.
• Launch browser.
• Set up event kist.
3-261