Hardware Information; Hardware Information Commands; Cbc, Battery Charger Connection; Cbc Parameters - Motorola AT Commands G24-L Developer's Manual

Hardware Information

Hardware Information Commands

+CBC, Battery Charger Connection

This command enables a user to query the battery charger connection. The battery level is an
avarage value, which is updated every 30 seconds
The following table shows the +CBC parameters.
Note:
Example
AT+CBC
+CBC: 0,60
April 15, 2008
Command Type
Read
Table 3-81: +CBC Parameters
<Parameter>
<bcs> Charger detection
0 Charger not detected
1 Charger detected
Note: The G24-L input power source is connected via the battery
pins.
<bcl> Battery charge level:
VCC, V
>3.7
3.5-3.7
3.4-3.5
3.35-3.4
3.3-3.35
<3.3
The G24-L does not allow the detection of battery use. The power supply of the G24-L is
connected via the battery pins. However, users can use this command to verify the level
of the G24-L input power source.
//This example shows 0 (battery powered) with 60% power.
G24-L AT Commands Reference Manual
Chapter 3: AT Commands Reference
Syntax Response/Action
+CBC +CBC:<bcs>,<bcl>
Description
Battery Level
90%
60%
20%
10%
5%
0%
3-129