Motorola AT Commands G24-L Developer's Manual page 405

\G
\J
\K
\N
\S
ATS97
+CACM
+CALM
+CAMM
+CAOC
+CBAND
+CBAUD
+CBC
+CBST
+CCFC
April 15, 2008
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command
This command sets the use of the
software control.
This command adjusts the
terminal auto rate.
This command is supported for
backward compatibility only, and
has no effect.
This command links the type.
This command displays the status
of selected commands and
S-registers.
This command indicates whether
an antenna is physically
connected to the G24-L RF
connector.
This command resets the Advice
of Charge accumulated call meter
value in the SIM file, EFACM.
This command handles the
selection of the G24's alert sound
mode.
This command sets the Advice of
Charge accumulated call meter
maximum value in the SIM file,
EFACMmax.
This command enables the
subscriber to get information
about the cost of calls.
This command is supported for
backward compatibility only, and
has no effect.
This command sets the baud rate.
This command enables a user to
query the battery charger
connection.
This command selects the bearer
service and the connection
element to be used when data
calls are originated.
This command enables control of
the call-forwarding
supplementary service.
G24-L AT Commands Reference Manual
Appendix A: Reference Tables
Description
Page 3-197
Page 3-197
Page 3-304
Page 3-197
Page 3-197
Page 3-143
Page 3-46
Page 3-171
Page 3-47
Page 3-44
Page 3-197
Page 3-132
Page 3-129
Page 3-31
Page 3-27
Page
A-3