Csmp, Set Text Mode Parameters; Csca Parameters - Motorola AT Commands G24-L Developer's Manual

Command
Type
Set
Read
Test
The following table shows the +CSCA parameters.
<Parameter>
<sca>
<tosca>
Example
AT+CSCA="4252833433"
OK
AT+CSCA?
+CSCA: "4252833433",129
OK

+CSMP, Set Text Mode Parameters

This command is a basic command and is used to select values for additional parameters needed
when SM is sent to the network or placed in storage when TEXT mode is selected.
Command
Type
Set
April 15, 2008
Syntax Response/Action
+CSCA=<sca>[,<tosca>] OK
or:
+CMS ERROR: <err>
+CSCA? +CSCA: <sca>,<tosca>
Table 3-45: +CSCA Parameters
Service Center Address
Type of Service Center Address is the current address format setting
Syntax Response/Action
+CSMP=[<fo>[,<vp> OK
[,<pid>[,<dcs>]]]]
or:
+CMS ERROR: <err>
G24-L AT Commands Reference Manual
Chapter 3: AT Commands Reference
Remarks
The Set command sets the service
center address.
The Test command for +CSCA is not
defined by ETSI, and therefore is not
supported by the G24-L. The G24-L
returns an error.
Description
Remarks
The set command selects values for
additional parameters needed when SM is
sent to the network or placed in storage
when text format message mode is
selected.
3-79