UI (User Interface)
<Parameter>
<response>
Example
AT+CRSM=176,28478,0,0,20
+CRSM: 144,0, FFFFFFFFFF
FFFFFFFFFF00000000000000000000
OK
AT+CRSM=178,28474,1,4,26
+CRSM: 144,0,72656EFFFFFFFFFFFFFFFFFF06818984143243FFFFFFFFFFFFFF
OK
AT+CRSM=192,12258
+CRSM: 144,0,0000000A2FE204000B00BB01020000
04-> Type of the file (EF) 00->RFU 0B00BB->Access conditions (READ=0-ALW, UPDATE=B-NEVER)
01->File status 02->Length of the following data (byte 14 to the end) 00->Structure of EF (transparent)
00->Length of a record (For cyclic and linear fixed EFs this byte denotes the length of a record. For a
transparent EF, this byte shall be coded '00')
OK
AT+CRSM=214,28498,0,0,8,C69018C7958C87
the file
3-220
Table 3-144: +CRSM Parameters (Cont.)
<sw1>
<sw2>
Error Description
152
80
103
XX
107
XX
109
XX
110
XX
111
XX
Response of a successful completion of the command previously issued (hexadecimal
character uppercase format). STATUS and GET RESPONSE return data, which gives
information about the current elementary data file_id. This information includes the
type of file and its size (refer to GSM 11.11). After READ BINARY or READ
RECORD command the requested data will be returned. <response> is not returned
after a successful UPDATE BINARY or UPDATE RECORD command.
//READ BINARY, GID1(6F3E),0 ,0 , 20 bytes
//Generic success code, 20 bytes of file data
//READ RECORD, ADN file(6F3A) data, 1, current, 26 bytes
//Generic success code, 26 bytes data of the 1st record
//GET RESPONSE, ICCID(2fe2)
//Generic success code, 0000-> RFU 000A->File size 2FE2-> File ID
//UPDATE BINARY, KcGPRS(6F52), 0,0, 8 bytes , data to be write to
G24-L AT Commands Reference Manual
Description
Increase cannot be performed, Max value reached.
Incorrect parameter P3 (NOTE: 'XX' gives the correct
length or states that no additional information is given
('XX' = '00').
Incorrect parameter P1 or P2.
Unknown instruction code given in the command.
Wrong instruction class given in the command.
Technical problem with no diagnostic given.
April 15, 2008