Motorola AT Commands G24-L Developer's Manual page 49

At commands reference manual
Hide thumbs Also See for AT Commands G24-L:
Table of Contents

Advertisement

AT Command
+CGSMS
+CMGS
+MCSAT
Network
Network Commands
+CSQ
+CRLP
+CREG
+CGREG
+COPS
+CPOL
+MFS
Hardware Information
Hardware Information Commands
+CBC
+MBC
+CBAUD
+IPR
+MTDTR
+MTCTS
&K
&C
April 15, 2008
Table 1-1: AT Commands (Cont.)
Description
This command handles the selection of the service or service
preference used by the G24-L to send mobile-originated SMS
messages.
This command sends an SM from the G24-L to the network.
This command enables/disables/exercises SMS alert tone for an
arriving SMS.
This command displays the signal strength received by the G24-L.
This command displays the Radio Link Protocol parameters.
This command enables/disables the network status registration
unsolicited result code.
This command enables/disables the GPRS network status
registration unsolicited result code.
This command enables accessing the network registration
information, as well as select and register the GSM network
operator.
This command is used to edit the list of preferred operators located
in the SIM card.
This command is used to determine how long the G24-L waits
before attempting to re-register after a registration attempt has failed
and the G24-L is not registered.
This command queries the battery charger connection.
This command allows the battery charger to be managed
(start, stop or automatic manage) and get indication for the
battery level (solicited or unsolicited reports).
This command sets the baud rate.
This command is responsible for setting and saving the request baud
rate.
This command checks and displays the physical current status of the
DTR pin of the RS232.
This command sets the CTS pin of the RS232 to not active (high),
waits one second and then sets the CTS to active (low).
This command configures the RTS/CTS flow control.
This command determines how the state of the DCD line relates to
the detection of the received line signal from the distant end.
G24-L AT Commands Reference Manual
Chapter 1: Product Features
Page
Page 3-109
Page 3-110
Page 3-111
Page 3-117
Page 3-118
Page 3-119
Page 3-121
Page 3-122
Page 3-125
Page 3-126
Page 3-129
Page 3-130
Page 3-132
Page 3-133
Page 3-134
Page 3-135
Page 3-135
Page 3-136
1-19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

G24-lc

Table of Contents