Displaying Curves; Displaying Measured Values - Dräger Oxylog 3000 plus Instructions For Use Manual

Monitoring

Displaying curves

The curve window can display the airway pressure
curve Paw, the flow curve or the CO
(optional). Refer to "Screen window structure"
on page 32.
To display a different curve:
Press the Curves

Displaying measured values

Measured values are displayed in the measured
values window.
To switch between the values:
Press the Values
is displayed on the screen.
90
curve
2
key.
Curves
key: the next value pair
The following values can be displayed:
– MVe
,
– FiO
2,
– RR,
– VTe,
– PEEP,
– Pmean,
– PIP
,
– Pplat,
– MVespon
,
– RRsp,
– etCO
2.
When the CO sensor is connected to the
2
ventilator, the etCO value will be shown
2
automatically in the measured values window.
The values are shown in pairs; the pairs of values
can be configured as required. Refer to "Customer
Service Mode" on page 98.
Instructions for Use Oxylog 3000 plus SW 1.n