Connecting The Power Supply; External Power Supply - Dräger Oxylog 3000 plus Instructions For Use Manual

Emergency and transport ventilator
Hide thumbs Also See for Oxylog 3000 plus:
Table of Contents

Advertisement

Assembly

Connecting the power supply

External power supply

To recharge the battery and to extend the electrical
operation time, use either:
– DC/DC converter, or
– AC/DC power pack.
For more information refer to page 146.
WARNING
A fully charged battery must always be
installed for safety reasons, even when
operating from an external power supply.
CAUTION
Without a charged battery installed, ventilation will
be interrupted in case of an external power failure.
NOTE
It is recommended to have a fully charged spare
battery available when using the
Oxylog 3000 plus.
Always position the device so that the external
power connector can be easily disconnected from
the ventilator.
38
Instructions for Use Oxylog 3000 plus SW 1.n

Advertisement

Table of Contents
loading

Table of Contents