Set Date And Time; Set The Measured Values Display Window; Enter Activation Code; Test Buttons And Potentiometer - Dräger Oxylog 3000 plus Instructions For Use Manual

Configuration

Set date and time

The date and time can be set.
1 Set the current date and time with the positions
Year, Month, Day, Hour and Minute and confirm.
2 The date and time can be confirmed with »Set«.

Set the measured values display window

In the measured values window, six pairs of
different values can be displayed. On the 7th page
of the Settings window, an overview of all
measured values will be displayed.
The arrangement of measured value pairs on the
individual pages of the measured values window
can be varied. etCO is optional.
2
NOTE
It is recommended that you have the FiO
a displayed value during ventilation.
Each measured value can be freely selected in any
position and is only displayed at that position.
102
To define the eleven values to be displayed:
Start configuration on page 1/6 and continue
through to 6/6.

Enter activation code

The activation codes for options can be entered.
The activated options are then displayed.
For the possible options, refer to "List of
Accessories" on page 167.

Test buttons and potentiometer

The operating elements on the front panel are
displayed schematically on the screen.
– Display = screen
– B = buttons
value as
2
Instructions for Use Oxylog 3000 plus SW 1.n