Table of Contents
Advertisement
Quick Links
Breathing system heater
Supplement to Operator's Instruction Manuals
®
Fabius
GS SW 1.3n
®
Fabius
GS SW 2.n
®
Fabius
GS SW 3.n
®
Fabius
Tiro SW 2.n
®
Fabius
Tiro SW 3.n
®
Fabius
GS premium SW 3.n
®
Fabius
plus SW 3.n
(90 37 781)
(90 37 933)
(90 38 685)
(90 38 132)
(90 38 686)
(90 38 923)
(90 39 054)
Advertisement
Table of Contents
Related Manuals for Dräger Fabius GS SW 1.3n
Summary of Contents for Dräger Fabius GS SW 1.3n
- Page 1 Breathing system heater Supplement to Operator’s Instruction Manuals ® Fabius GS SW 1.3n (90 37 781) ® Fabius GS SW 2.n (90 37 933) ® Fabius GS SW 3.n (90 38 685) ® Fabius Tiro SW 2.n (90 38 132) ®...
-
Page 2: Table Of Contents
Contents Contents For Your Safety and that of Your Patients ..............3 Purpose of This Document ..................4 Breathing System Heater (Optional) ............... 4 Symbol Definition ....................... 5 General Warnings and Cautions ................6 Installation of BSHPS (Fabius GS) ................7 Installation of BSHPS (Fabius Tiro) ................ -
Page 3: For Your Safety And That Of Your Patients
For Your Safety and that of Your Patients For Your Safety and that of Your Patients Strictly follow the Instructions for Use Any use of the breathing system heater requires full understanding and strict observation of these instructions and the Fabius GS or Fabius Tiro Operator's Instruction Manual. -
Page 4: Purpose Of This Document
Purpose of This Document Purpose of This Document Breathing System Heater (Optional) Breathing system heater for use in conjunction with the Fabius GS and Fabius Tiro anaesthetic machines in order to reduce the condensation of moisture in the breathing system during low-flow operation (fresh gas flow below 1 l/min). -
Page 5: Symbol Definition
Symbol Definition Symbol Definition The following symbols appear on the power supply of the (optional) breathing system heater. Caution: Refer to accompanying documents before operating equipment. Caution: Risk of electric shock, do not remove cover. Refer servicing to a DrägerService representative. Degree of protection against electric shock: Class 1 Type B. -
Page 6: General Warnings And Cautions
General Warnings and Cautions General Warnings and Cautions The following list of warnings and cautions apply to general operation and maintenance of the Fabius GS and Fabius Tiro. Warnings and cautions about installing and operating specific parts appear with those topics. •... -
Page 7: Installation Of Bshps (Fabius Gs)
Installation of BSHPS (Fabius GS) Installation of BSHPS (Fabius GS) The following provides instruction on installation of the power supply for the breathing system heater (mains adapter). Left Mount COSY BSHPS Installation Figure 1. BSHPS Installation on Machine with Left Mount COSY The following numbers in boldface refer to Figure... - Page 8 Installation of BSHPS (Fabius GS) Right Mount COSY BSHPS Installation Figure 2. BSHPS Installation on Machine with Right Mount COSY - Step 1 1. Install the power supply onto the left rear GCX rail of the Fabius GS by sliding the mounting plate of the power supply through the opening of the rail (1 in Figure...
-
Page 9: Installation Of Bshps (Fabius Tiro)
Installation of BSHPS (Fabius Tiro) Installation of BSHPS (Fabius Tiro) The following provides instruction on installation of the Breathing System Heater Power Supply (BSHPS). Left Mount COSY BSHPS Installation Figure 4. BSHPS Installation on Machine with Left Mount COSY (Trolley) (Trolley) The following numbers in boldface refer to Figure... - Page 10 Installation of BSHPS (Fabius Tiro) Right Mount COSY BSHPS Installation Figure 5. BSHPS Installation on Machine with Right Mount (Trolley) COSY - Step 1 (Trolley) 1. Install the power supply onto the left rear GCX rail of the Fabius Tiro by sliding the mounting plate of the power supply through the opening of the rail (1 in Figure...
- Page 11 Installation of BSHPS (Fabius Tiro) Wall Mounted Machine BSHPS Figure 7. BSHPS Installation on Wall Mounted Machine - Step 1 Installation 1. Remove the GCX slide plate (1 in Figure 7) from the side of the power supply by removing the two screws (2 in Figure 2.
- Page 12 Installation of BSHPS (Fabius Tiro) Left Mounted COSY BSHPS Wall Mounted Installation 4. On a left mounted COSY, route the power cable Figure 10. BSHPS Installation on Wall Mounted Machine (Left Mount COSY) 1 for the heater below and behind the power supply and then up to the rear of the COSY arm (1 in Figure...
- Page 13 Installation of BSHPS (Fabius Tiro) Right Mounted COSY Wall Mounted BSHPS Installation 4. On a right mounted COSY machine, route the Figure 12. BSHPS Installation on Wall Mounted Machine power cable for the heater through the trough on (Right Mount COSY) the rear of the cabinet (1 in Figure 12).
-
Page 14: Operation Of Bshps
Operation of BSHPS Operation of BSHPS Figure 13. BSHPS Back 1. Plug the power cord (1 in Figure 13) into a mains power outlet on the wall. The green LED for MAINS POWER (2 in Figure 13) will illuminate when the plug is connected to power. 2. - Page 15 Operation of BSHPS BSHPS Problem Resolution Figure 15. BSHPS Front Note: Call your local Authorised Service Organisation or DrägerService if the following steps do not resolve BSHPS problems. Bottom of COSY Not Warm After 30 Minutes 1. Ensure that the HEATER POWER switch (1 in Figure 15) is in the ON position.
-
Page 16: Switching Off Bshps
Switching Off BSHPS Switching Off BSHPS Figure 18. BSHPS Front 1. Switch the HEATER POWER switch (1 in Figure 18) to the OFF position (bottom of the rocker depressed). The HEATER POWER LED will darken (2 in Figure 18). 2. Unplug the power cord (3 in Figure 18) from the mains power outlet on the wall. - Page 17 Fabius GS or Fabius Tiro Operator's Instruction Manual under "Machine (exterior)". Servicing / Maintenance Please refer to the following Instruction Manuals Fabius GS SW 1.3n (90 37 781) Fabius GS SW 2.n (90 37 933) Fabius GS SW 3.n (90 38 685) Fabius Tiro SW 2.n...
-
Page 18: Bshps Technical Data
BSHPS Technical Data BSHPS Technical Data The Fabius GS and Fabius Tiro can be configured with a breathing system heater to reduce condensation of moisture in the system. Electrical AC Input Voltage and Current 100-240 VAC, 50-60 Hz nominal, single phase, 0.6 Amps max. DC Output 15Vdc ±... -
Page 19: Daily Checkout
Daily Checkout Daily Checkout Breathing System Heater (when present) Check cable connections. Check power cord connections. Ensure that the MAINS POWER LED is illuminated. Ensure that the HEATER POWER switch is in the “ON” position. Ensure that the “HEATER POWER ON” LED is illuminated. - Page 20 These Instructions for Use apply only to Fabius GS, Fabius Tiro Fabius GS premium Fabius plus with Serial No.: If no Serial No. has been filled in by Dräger these Instructions for Use are provided for general information only and are not intended for use with any specific machine or device.
Need help?
Do you have a question about the Fabius GS SW 1.3n and is the answer not in the manual?
Questions and answers