Setting Configuration Parameters / Display Information - Dräger Oxylog 3000 plus Instructions For Use Manual

Configuration

Setting configuration parameters / display information

The actual screen display may differ in appearance
or configuration from these illustrations.
1 To switch the device ON briefly press the
key. The device performs a selftest and the
operator is prompted, on the display, to activate
the configuration menu or device check:
Press rotary knob for device check and
configuration.
2 Press the rotary knob to confirm, before the
black progress bar is complete.
The start-up menu is then displayed:
3 Select Configuration and information in the
start-up menu and confirm.
96
Instructions for Use Oxylog 3000 plus SW 1.n