Technical Documentation For The Oxylog 3000 Plus According To Emc; Standard Iec 60601-1-2; General Information - Dräger Oxylog 3000 plus Instructions For Use Manual

Technical Data

Technical Documentation for the Oxylog 3000 plus according to EMC

standard IEC 60601-1-2

General Information

The EMC conformity of the Oxylog 3000 plus includes the use of following external cables, transducers
and accessories:
– AC/DC power pack
– DC/DC Converter
– All-round Wall Holder
– Equipment holder
– Carrying bag
– Quick Power Connector
– Carrying System
– CO sensor
2
– CO extension cable
2
– Data communication cable
Refer to the "List of Accessories" on page 167 for additional information.
WARNING
The use of accessories, transducers and
cables other than those specified, with the
exception of transducers and cables sold by
the manufacturer of the Oxylog 3000 plus as
replacement parts for internal components,
may result in increased emissions or
decreased immunity of the Oxylog 3000 plus.
WARNING
The Oxylog 3000 plus should not be used
adjacent to or stacked with other equipment; if
adjacent or stacked use is inevitable, the
Oxylog 3000 plus should be observed to ver-
ify normal operation in the configuration in
which it will be used.
152
Instructions for Use Oxylog 3000 plus SW 1.n