Displaying Curves And Measured Values; Displaying Measured Values - Dräger Savina Instructions For Use Manual

Displaying Curves and Measured Values

On the main page
the airway pressure curve, or flow curve and three relevant
measured values are displayed.
To change the curve display
Press »Curves « key.
Example: flow curve
The combination of measured values in the measured value line
can be configured, see page 49.

Displaying measured values

∆∆
Press »Values « key. The screen page »Values1/2«
appears or, in »Mask/NIV« mode, »Values 1/3«.
The airway pressure is indicated by a bar display.
The other measured values are displayed numerically.
Displaying other measured values
∆∆
Press »Values « key again. The screen page
»Values2/2« appears or, in »Mask/NIV« mode,
»Values 2/3«.
When ventilating without plateau, the value Tinsp will appear
instead of Tplat.
Operation
33