Table of Contents
Advertisement
overflow
Syntax
overflow percent
no overflow
config>cflowd
Context
This command specifies the percentage of the flow cache entries removed when the maximum
Description
number of entries is exceeded. The entries removed are the entries that have not been updated for the
longest amount of time.
The no form of this command resets the number of entries cleared from the flow cache on overflow to
the default value.
Default
1 %
percent — Specifies the percentage of the flow cache entries removed when the maximum number of
Parameters
rate
Syntax
rate sample-rate
no rate
config>cflowd
Context
This command specifies the rate (N) at which traffic is sampled and sent for flow analysis. A packet is
Description
sampled every N packets; for example, when sample-rate is configured as 1, then all packets are sent
to the cache. When sample-rate is configured as 100, then every 100th packet is sent to the cache.
The no form of this command resets the sample rate to the default value.
1000
Default
sample-rate — Specifies the rate at which traffic is sampled.
Parameters
template-retransmit
Syntax
template-retransmit seconds
no template-retransmit
config>cflowd
Context
This command specifies the interval for sending template definitions.
Description
600
Default
seconds — The value expressed in seconds before sending template definitions.
Parameters
7450 ESS OS Router Configuration Guide
entries is exceeded.
1 — 50 percent
Values
1 — 10000
Values
10 — 600
Values
Cflowd
Page 561
Advertisement
Table of Contents
