Table of Contents
Advertisement
MAC Filter Match Criteria
dsap
dsap dsap-value [mask]
Syntax
no dsap
config>filter>mac-filter>entry>match
Context
Configures an Ethernet 802.2 LLC DSAP value or range for a MAC filter match criterion.
Description
This is a one-byte field that is part of the 802.2 LLC header of the IEEE 802.3 Ethernet Frame.
The snap-pid field, etype field, ssap and dsap fields are mutually exclusive and may not be part of the
same match criteria.
exclusive based on the frame format.
Use the no form of the command to remove the dsap value as the match criterion.
no dsap
Default
dsap-value — The 8-bit dsap match criteria value in hexadecimal.
Parameters
mask — This is optional and may be used when specifying a range of dsap values to use as the match
0x00 — 0xFF
dst-mac
dst-mac ieee-address [mask]
Syntax
no dst-mac
config>filter>mac-filter>entry
Context
Configures a destination MAC address or range to be used as a MAC filter match criterion.
Description
The no form of the command removes the destination mac address as the match criterion.
no dst-mac
Default
Page 480
MAC Match Criteria Exclusivity Rules on page 400
0x00 — 0xFF (hex)
Values
criteria.
This 8 bit mask can be configured using the following formats:
Format Style
Decimal
Hexadecimal
Binary
Default
FF (hex) (exact match)
Format Syntax
DDD
0xHH
0bBBBBBBBB
7450 ESS OS Router Configuration Guide
describes fields that are
Example
240
0xF0
0b11110000
Advertisement
Table of Contents
