Table of Contents
Advertisement
config>router>sgt-qos
Context
This command configures DSCP name to FC mapping.
Description
dscp-name — Specifies the DSCP name.
Parameters
fc-name — Specifies the forward class name.
bfd-template
bfd-template name [create]
Syntax
no bfd-template name
config>router>bfd
Context
This command creates or edits a BFD template. A BFD template defines the set of configurable
Description
parameters used by a BFD session. These include the transmit and receive timers used for BFD CC
packets, the transmit timer interval used when the session is providing a CV function, the multiplier
value, the echo-receive interval, and whether ther BFD session terminates in the CPM network
processor.
no bfd-template
Default
name — Specifies a text string name for the template up to 32 characters in printable 7-bit ASCII,
Parameters
transmit-interval
Syntax
transmit-interval transmit-interval
no transmit-interval
config>router>bfd>bfd-template
Context
This command specifies the transmit timer used for BFD packets. If the template is used for a BFD
Description
session on an MPLS-TP LSP, then this timer is used for CC packets.
no transmit-interval
Default
transmit-interval — Specifies the transmit interval. Note that the minimum interval that can be
Parameters
7450 ESS OS Router Configuration Guide
be, ef, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cp9, cs1, cs2, cs3, cs4, cs5, nc1, nc2, af11,
Values
af12, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, cp11, cp13, cp15,
cp17, cp19, cp21, cp23, cp25, cp27, cp29, cp31, cp33, cp35, cp37, cp39, cp41,
cp42, cp43, cp44, cp45, cp47, cp49, cp50, cp51, cp52, cp53, cp54, cp55, cp57,
cp58, cp59, cp60, cp61, cp62, cp63
be, l2, af, l1, h2, ef, h1, nc
Values
enclosed in double quotes.
configured is hardware dependent.
10 ms — 100,000 ms in 1 ms intervals
Values
10 ms for CPM3 or higher; 1 second for other hardware
Default
IP Router Configuration
Page 107
Advertisement
Table of Contents
